Preventing Mold Growth in Orlando Commercial Properties

5/27/2021 (Permalink)

Mold that is left untreated can cause significant damage to your commercial property in Orlando

Mold is a common problem that plagues many Orlando commercial properties. It can result in significant damages, as well as lost revenue for the property's owner. To prevent mold from growing in a commercial building, it's essential to take specific steps. 

What Kinds of Mold Grows in Florida's Commercial Buildings?

In Florida and other hot states, there are a few common types of mold that will grow in commercial buildings: 

Aspergillus - Aspergillus is amongst the most commonly found mold species and thrives indoors in the right environment.

Stachybotrys atra - This type of mold can grow in buildings that are damp and humid.

Penicillium - This is one of the most common molds found indoors and growing on many surfaces from carpets, clothing, food products like cheese, bread to building materials.

To prevent mold growth in your office, follow these steps:

Keep humidity levels below 60% by using a humidifier or dehumidifier. Heating and air conditioning systems should be installed to regulate the temperature for optimal indoor comfort with a range of 65°F (18.33°C) - 75°F (23.89°C).

Avoid overuse of ventilation units which can cause condensation on surfaces where water may collect if it's cold outside or too humid indoors.
Be sure that all floors are clean before leaving them wet from mop bucket water spills. Wipe down any upholstery furniture and carpets regularly, so dust collects less inside. Clean windowsills, window seats, vents, and other areas.

 

Commercial Buildings: What Can Cause Mold Growth

Mold can also grow in a variety of areas, but they thrive on warm and humid surfaces. This is why it's essential to wipe down all upholstery furniture and carpets regularly, so dust collects less inside the building.

Windowsills allow moisture from rain or snow into your buildings, where it can collect for days before evaporating back out again, which means if you have leaks around windowsill seals, then mold will form quickly as a result.
Ventilation systems that are not adequately designed or cleaned also contribute to humidity levels increasing indoors.

Some tips to prevent potential mold growth at home or work include keeping humidity levels below 60% using a humidifier or dehumidifier.
Also, be sure to use a dehumidifier and clean out the ducts regularly. Be sure that your building has good ventilation and that the heat is not making it too humid.

Mold can grow in Orlando commercial properties if there are leaks around windowsill seals, inadequate ventilation systems, or high humidity levels. It's always best to practice prevention to don't have to deal with mold growth later. 

Steps To Take to Prevent Mold Growth

Remove any musty odors or leaks contributing to the growth of mold. Install quality air conditioning and heating systems so if there are excess moisture levels in the building due to flooding or heavy rains. They will be able to properly escape from the building without becoming trapped and causing more moisture problems down the line.

Other steps you should take to prevent mold and mildew growth are installing a high-quality, tight grout sealant in the seams of your building's foundation. You'll also want to remove any stagnant water sources that may be present on your property or nearby it.

This includes puddles from storm runoff or other potential hazards like ponds without lids. Finally, make sure there is proper ventilation for all drywall joints so moisture doesn't get trapped behind them - this can lead to more severe problems down the line if not caught early enough. 

Removing Mold from Commercial Buildings

 The Florida humid climate is perfect for the growth of mold and mildew. Mold typically grows in damp areas with a lack of air circulation, like bathrooms or kitchens with poor ventilation.

It's essential to take preventative measures against these types of infestations so they don't spread throughout your commercial building and make it uninhabitable.

One way you can do this is by keeping moist surfaces dry as much as possible. If this isn't possible, try using an appropriate surface cleaner that will kill any living organisms trying to live on wet materials such as tile grout sealant or disinfecting wipes explicitly designed for killing mold spores around sinks and drains.

It would be best if you refrained from cleaning up spills yourself; instead, contact professionals trained in commercial mold removal.

Additionally, it would help if you washed out any sponges or mop heads used to clean and disinfect surfaces that may contact water after use. It's important for these materials not to be reused because they could quickly become a breeding ground for bacteria and fungus spores.

These simple precautions will go far in preventing mold growth and its related damages on Orlando commercial properties throughout Central Florida.

Protect against lost revenue due to downtime periods caused by these issues properties throughout Central Florida and protect against lost revenue generated by downtime periods due to these issues.